Tri Tool Boilermaster Beveler Standard - Manual (Page 19)

19
Model BOILERMASTER™
92-0629 : Rev. 080714
CAUTION:
WARNING:
Depress the air motor trigger. Adjust the cutting speed by rotating the flow
valve at the air connection. Reference the 'Cutting Speeds and Feeds' later
in this manual.
Rotate the feed handle clockwise to bring the tool bit(s) and pipe closer
together.
The actual machining operation will begin when the first tool bit contacts the
pipe.
DO NOT OVERRIDE THE DEADMAN SWITCH ON THIS UNIT. Locking
down, obstructing, or in any way defeating the deadman switch on this unit
may result in serious injury.