Tri Tool Boilermaster Beveler Standard - Manual (Page 10)

10
TRI TOOL INC.
92-0629 : Rev. 080714
MODEL BOILERMASTER™ with an ELECTRIC MOTOR
Weight 18 lbs (8.1 kg)
Power Requirements 115 VAC, 28 to 60 Hz 5.25 amp
PIPE CUTTING CAPACITIES
Basic Pipe Sizes
1” Pipe
Schedule 40 (Small Mandrel required to mount in 1” schedule 80 and
above.)
1 1/4” through 2 1/2” Pipe
Up to Schedule 80
3” through 4” Pipe
Up to Schedule 40
* Some Schedules may require optional equipment.
Basic Tube Sizes
Up to .250” (6.4 mm) wall tubing with a maximum OD of 4.50” (114.3 mm)
and a minimum ID of 1.25” (31.7 mm) may be beveled with standard mandrel.
Wall Thickness Capacity (Limitations)
Wall thickness of schedules listed, .276” (7 mm) maximum, in the range listed
can be machined without limitations.
Wall thicknesses greater than .276” (7 mm) require special procedures and
are subject to Duty Cycle limitations to prevent motor damage. Contact Tri
Tool Inc. for heavier wall procedures.
Counterboring Operations
The tool will counterbore pipe and tubing with an ID of 1.50” (38.1 mm) to
4.33” (110.2 mm).