Tri Tool Boilermaster Beveler Standard - Manual (Page 11)

11
Model BOILERMASTER™
92-0629 : Rev. 080714
DUTY CYCLE
The BOILERMASTER™ with an electric motor duty cycle on high cutting load
applications (see above), is limited to 50% ‘On’ time with a maximum of five (5)
minutes continuos ‘On’ time.
MATERIAL CUTTING CAPABILITIES
Mild steels, chrome steels, (Rc 35 max), stainless steel, copper-nickel alloys and
aluminum without limitations except size and wall thickness as specified in the
above paragraphs.
Inconel and some other high temperature alloys may require special procedures as
a function of wall thickness and type of end preparations. Contact Tri Tool’s
Engineering Department for details.
DRIVE SYSTEM
Final Drive Gear Driven
Electric Motor - 2 speed Ranges & 6:1 Gear Reduction
Free speed
Low Range 168 rpm
High Range 316 rpm
Max. HP Speed
Low Range 112 rpm
High range 210 rpm
POWER SUPPLY
115 VAC, 5.25 Amps, 28 to 60 Hz.