General description – Tri Tool 75-0115 Air Caddy User Manual
Page 6
92-0896 : Orig. 001215
TRI TOOL INC.
6
NOTE:
GENERAL DESCRIPTION
The Air Caddy (P/N 75-0115) is a modular Filter/Regulator/Lubricator (FRL)
unit.
The filter removes solid and liquid contaminates in compressed air that pro-
duce wear in air driven equipment.
The regulator reduces and holds compressed air to a desired working pres-
sure.
The lubricator automatically lubricates air driven equipment by introducing
small droplets of oil into the air stream.
The Air Caddy is supplied with 10’ (3m) of 3/4” (19mm) diameter hose with a
3/4” NPT male end connect to the outlet port on the Air Caddy and a quick
disconnect to connect to the tool.
The inlet port of the Air Caddy is a 3/4” NPT female to which the customer
must provide an air supply line.
The Air Caddy is recommended for use with all air motors supplied with
TRI TOOL Inc. products.
Operation of any TRI TOOL Inc. air powered equipment without the use of an
air filter/regulator/lubricator (FRL) will void the warranty for that equipment.
- 204B Cutting Head (9 pages)
- 204B Cutting Head (10 pages)
- 204B Cutting Head (9 pages)
- 212B Single Point Spring Hanger Assembly (8 pages)
- 204B Cutting Head (13 pages)
- 204B Cutting Head (36 pages)
- 204B Cutting Head (17 pages)
- 201BA Beveler (36 pages)
- 204B Elbow Mandrel (16 pages)
- 204B Beveler (45 pages)
- 204B Flange Facer (21 pages)
- 206B Elbow Mandrel (17 pages)
- 206B Flange Facer (22 pages)
- 206B Beveler (45 pages)
- 212B ID Tracking Module (17 pages)
- 206B Miter Mandrel (16 pages)
- 206B Sleeve Mandrel (13 pages)
- 208B Elbow Mandrel (20 pages)
- 208B ID Tracking Module (18 pages)
- 208B Miter Mandrel (20 pages)
- 208B Flange Facer (28 pages)
- 208B Sleeve Mandrel (15 pages)
- 212B Elbow Mandrel (16 pages)
- 214B Beveler Single Point Flange Facer (41 pages)
- 212B Flange Facer (22 pages)
- 212B Miter Mandrel (20 pages)
- 212B Single Point Hydraulic Motor Assembly (9 pages)
- 212B Single Point Flange Facer Miter Mandrel (28 pages)
- 212B Sleeve Mandrel (12 pages)
- 214B Elbow Mandrel (20 pages)
- 214B Flange Facer (23 pages)
- 214B ID Track Module (19 pages)
- 214B Miter Mandrel Head Kit (22 pages)
- 214B Sleeve Mandrel (13 pages)
- 236B ID Tracking Module (23 pages)
- 224B Miter Mandrel (27 pages)
- 224B Single Point (30 pages)
- 230B Beveler Flange Facer (16 pages)
- 230B ID Tracking Module (15 pages)
- 230B Lifting Frame (19 pages)
- 236B Miter Mandrel (25 pages)
- 301SP Tube Squaring (35 pages)
- 236B Single Point (32 pages)
- 302 Tube Squaring Micro Feed Assembly (11 pages)
- 302 Tube Squaring (31 pages)