Tri Tool 602-5SBM Clamshell Air - Manual (Page 6)

6
TRI TOOL INC.
92-0093 Rev. 131230
GENERAL DESCRIPTION
The Model 602.5SBM Low-Profile Clamshell is a split-frame pipe lathe designed for
severing and beveling in-line pipe with a minimum range of 1” pipe through 3” tube
with minimal radial and axial clearance.
Using standard Tool Blocks the Model 602.5SBM may be configured to perform the
following operations:
Sever in-line pipe.
Sever and bevel in-line pipe.
Sever and double bevel in-line pipe.
Do socket weld removal.
DESIGN AND OPERATION FEATURES
The easily adjustable precision bearing surfaces pre-load and stabilize the rotating
head to provide long life, low maintenance, stability, and precision.
The Clamshell splits into two halves for mounting on closed loop systems.
All parts are secured to the two halves, thus avoiding the loss of parts and at the
same time providing maximum ease of handling.
The Clamshell may be equipped with self-centering Clamping Pads for quick, easy
mounting or may be equipped with Adjustable Clamping Pads for out-of-round pipe
conditions.
Dual Tool Blocks with Auto-feed Sprockets and Adjustable Slides provide maximum
maintainability, life, and operator safety, with a minimum of operator training.
The Auto-feed Sprockets provide .003” (.08mm) of radial feed per revolution of the
Headstock for a controlled depth of cut.
The drive gears and bearing surfaces are covered for operator safety and are
shielded to provide protection from dust and chips.
The operator’s controls are located away from the rotating Headstock for the
operator’s safety.