Tri Tool 572AC Sever Machine - Manual (Page 8)

8
TRI TOOL INC.
92-0660 : Rev. 080423
Maximum Wall Thickness
Up to .065" (1.65 mm) wall
MATERIAL CUTTING CAPABILITIES
Mild steels, chrome steels (Rc 35 max.), stainless steel, copper-nickel and aluminum
without limitations except size and wall thickness as specified.
Inconel and some other high temperature alloys may require special procedures as a
function of wall thickness and type of end preparations. Contact Tri Tool’s Engineering
Department for details.
MOUNTING
Manually actuated collet clamping system.
DRIVE SYSTEM
Electric - Standard
Pneumatic - Available on request.
POWER REQUIREMENTS
115 vac, 28 to 60 hz, 5.25 amp
230 vac, 50/60 hz
SPEED
Cutting Head Maximum (Electric)
Low - 60 RPM
High - 120 RPM
FEED
Autofeed system adjustment from .001" (.02 mm) to .005" (.13 mm).