Tri Tool 572AC Sever Machine - Manual (Page 6)

6
TRI TOOL INC.
92-0660 : Rev. 080423
GENERAL DESCRIPTION
The Model 572AC SEVERMASTER® severs 1/4” to 2” (6.35 mm to 50.80 mm) diam-
eter tubes and thin wall pipe within the size range.
The Model 572AC accepts its own torque through the Collet clamping system.
The Collet provides accurate centering and full diameter support for minimum distortion
of thin wall tubing.
Single lever actuation of Collet.
This machine enhances productivity by incorporation of an Auto-Cycle Tool Module and
Quick Lock Collet Closure.
The Auto-Cycle Tool Module incorporates a cam cycle tool bit feed mechanism, which
automatically returns the tool bit to the home position ready to start the next cut.
The tool module also allows setting the start and finish cut position to minimize the cycle
time.
The feed increment per revolution is adjustable to match the cutting relative to the
material.
A variable speed motor provides cutting speed control for tool bit life and ID burr condi-
tion.
Gear driven powerhead rotates on a precision cross roller bearing.
Gears are enclosed for operator safety.
The Quick Lock Collet Closure mechanism actuates the Collet with a single lever stroke
and provides for simple Collet changes.
Tool bit options are available to minimize the burr on either of the mounting side or the
drop-off side of the sever line and in different edge widths to match the tube wall thick-
nesses.
The Model 572AC also incorporates mounting features to allow use of an SQM-1AC
Tube Squaring Module for optimum burr free ends.