Tri Tool 308 Tube Squaring - Manual (Page 6)

6
TRI TOOL INC.
92-0628 : Rev. 961122
GENERAL DESCRIPTION
The Model 308, Tube Squaring Machine is a light-weight portable machine designed
for facing and squaring 1.00” to 8.63” (25.4 mm to 219.2 mm) outside diameter
tubing with an ability to handle up to .250” (6.4 mm) thick wall.
Beveling and/or inside diameter deburring may also be performed with this machine.
The Model 308 features an integral, variable speed 115 VAC, 60 Hz or a 220 VAC,
50 Hz electric drive.
The Model 308 offers (3) three OD Tube Clamping Adapter Kits:
The 800 Series Collet Adapter Kit uses precision outside diameter Collets to
hold the tubing round to accurately square and face with a minimum burr. The
tube range is from 4.00” to 8.63” OD (101.6 mm to 219.2 mm dia).
The 400 Series Collet Adapter Kit uses precision outside diameter Collets to
hold the tubing round to accurately square and face with a minimum burr. The
tube range is from 1.00” to 4.50” OD (25.4 mm to 114.3 mm dia).
The Saddle Adaptor Kit uses OD clamping two-piece saddles. The tube
range is from 1.00” to 8.63” OD (25.4 mm to 219.2 mm dia).
Part No. Description
01-1327 Model 308E with a 115 VAC, 60 Hz Electric Motor
01-1328 Model 308E with a 220 VAC, 50 Hz Electric Motor