Tri Tool 212B Miter Mandrel - Manual (Page 7)

7
Model 212B MM (Miter Mandrel)
92-0449 : Orig. 930630
SPECIFICATIONS
DESIGN AND OPERATING FEATURES
The Miter Mandrel is secured to the ID of the workpiece by way of four (4) individu-
ally adjusted Jackscrews.
Once secured, two (2) distinct types of adjustments are easily performed: Angular
offset and parallel offset.
The angular offset adjustment allows the Mandrel Shaft to be precisely aligned with
the workpiece (even though the ID of the workpiece might be irregular) or it may be
adjusted up to 5
° from the centerline in any direction desired to give a mitered prep.
The parallel offset adjustment is done by adjusting the Jackscrews to re-center the
Mandrel Shaft after the angular offset adjustment has been made.
Both adjustments are accomplished with the aid of a Dial Indicator Kit.
SPECIFICATIONS
Weight
14 lbs. (6.4 kg)
Envelope Drawing
14.36" (364.7 mm)
11.99" (304.5 mm)
15°
.19"
(4.8 mm)
3.82"
(97.0 mm)
DIA