Thermon ECM-OS - Manual (Page 4)

4
10.
Use the rotary switches for settling
Control and Limit Temperature, (Celsius
or Fahrenheit) and Auto or Manual reset
(Control switches on Type "C", Limiter
switches on Type "L" and both on Type "CL").
ECM-OS
INSTALLATION PROCEDURES
13.
Install IEK insulation entry kit to seal
heating cable and RTD lead wire
penetrations through insulation cladding.
12.
Slide IEK insulation entry kit onto RTD
lead wire. Fix RTD lead wire and sensor
to pipe.
11.
Install junction box lid using mounting
screws provided.
RTD Lead Wire
Heat
Trace
IEK
Insulation Entry
RTD Lead Wire
IEK
Insulation Entries
Specifications and information are subject to change without notice. Form PN50872U-0314
THERMON . . . The Heat Tracing Specialists ®
Corporate Headquarters
100 Thermon Dr.
•
PO Box 609
San Marcos, TX 78667-0609
•
USA
Phone: +1 512-396-5801
European Headquarters
Boezemweg 25
•
PO Box 205
2640 AE Pijnacker
•
The Netherlands
Phone: +31 (0) 15-36 15 370
For the Thermon office nearest you visit us at . . . www.thermon.com For Access To Installation Videos: