Knob configuration, Led strip lamp – Tendzone RC External Wall Control Panel User Manual
Page 13

Note: for PS type panel or MIX type panel, first of all, associate the panel itself and the matrix,
select the key, select the microphone setting in the panel configuration options in the function list, and
then select the corresponding input channel, i.e., input to the matrix channel through the panel.
There are two options for the channel input mode, with phantom power and without phantom
power. With phantom power: open the microphone switch while provide the phantom power.
2.5.4
Knob configuration
Select the knob as shown in the figure. The knob can only control the parameters of gain and
continuous changing numerical range type, and the parameters configured are displayed in the panel
function list.
2.5.5
LED strip lamp
There are two types of strip lamps, one is arc-shaped
, and the other is
, which can
only display the parameters of gain and continuous changing numerical range type.