Teletronics Wi-Fi VoIP Phone - Manual (Page 2)

Sample Application Diagram Initial Set-Up Guide (Cont.)
Initial Set-Up Guide
PLEASE VISIT OUR WEBSITE AT WWW.TELETRONICS.COM FOR MORE INFORMATION
HOTSPOT
DSL/ CABLE MODEM
WIRELESS
DSL/ CABLE MODEM
TRAVELER
EZLoop WI-FI
VoIP PHONE
INTERNET
OFFICE A
OFFICE B
EZLoop WI-FI
VoIP PHONE
EZLoop WI-FI
VoIP PHONE
PC
NOTEBOOK PDA
PC
1. Installing Battery and Charging the phone
Press the Silver button on the back of the phone to remove the cover. Insert the
battery. Slide the cover back on. Plug in the AC adapter to phone and to power
outlet. Charge the battery for 2 hours before start using the WiFi Phone
4. Configuring Network Setting
Press the left Soft key for Menu. Scroll down to 4. Network Setting and press OK.
Select the network type: Fixed IP, DHCP, or PPPoE, and enter the configuration
address/setting.
5. Configuring SIP Setting
Press the left Soft key for Menu. Scroll down to 5. SIP Settings and press OK.
Scroll to Registrar and press OK. Enter Registrar IP (IP Address or domain name),
Port, & Expiry Time
6. Configuring from Web Browser
Default IP Address: 192.168.0.6
User Account ID: user
Password: 1111
Administrator Account ID: voipadmin
Password: admin
Please Note:
Use web browser to access the WiFi Phone through GUI interface for further
settings configuration. Make sure the phone is connected to a wireless network,
and use the current assigned IP address.
3. Configuring Wireless Network
Press the left Soft key for Menu. Scroll down to 7. Wireless and press OK. Scroll to
Site Survey and press OK. Select the name of the wireless you want to connect and
press OK.
2. Press and hold the “End / Power Key” red button for 2 seconds to turn
on / off the phone