Tech Source Raptor Drivers for HP-UX User Manual
Page 5
i
TABLE OF CONTENTS
INTRODUCTION
1-1
1.1 Overview
1-1
1.2 Conventions
1-2
HARDWARE INSTALLATION
2-1
2.1 Hardware Configurations Supported
2-1
2.2 Installation of All Raptor Graphics Cards
2-1
2.3 Installation of Raptor 2100/2500 FPS
2-2
SOFTWARE INSTALLATION
3-1
3.1 Requirements
3-1
3.2 CD-ROM Installation
3-1
3.2.1 Installation on HP-UX 10.20
3-2
3.2.2 Installation on HP-UX 11.0
3-3
3.2.3 Installation on HP-UX 11i
3-4
3.2.4 Mounting the CD-ROM Manually
3-5
3.3 New Devices
3-6
3.4 Changing Resolution on Raptor Cards
3-8
3.4.1 Changing Resolution on Raptor 2000 and
Raptor 2100T
3-8
3.4.2 Changing Resolution on Raptor 1100T
3-8
3.4.3 Changing Resolution on Raptor 2500T-DL
3-8
INVOKING X WINDOWS
4-1
4.1 Overview
4-1
4.2 Configuring X Windows
4-1
4.2.1 Single Screen Mode
4-1
4.2.2 Multi-Screen Mode
4-2
4.3 Setting Bit-Depth and Resolution
4-2
4.3.1 Setting Bit-Depth
4-2
4.3.1.1 Config File
4-3
4.3.1.2 STARSMODE Variable
4-3
4.3.2 Setting the Resolution
4-4
4.4 startx
4-5
4.5 xinit
4-5
4.6 Common Desktop Environment (CDE)
4-6