Tecfluid MC-01 - Manual (Page 4)

Cod:E-MI-2151061 I Rev:1
4
2 SETTING UP AND PROGRAMMING
2.1 Description of the front panel
1.
Red LED power supply pilot light .
2.
LCD Display (2 lines with 16 characters per line )
3. "ON/OFF"
Push-button
4. "PROG."
Push-button
5.
"RESET T" or "Decrement Data" Push-button
6.
"RESET P" or "Increment Data" Push-button
7. "ENTER"
Push-button
8. "Rotation"
Push-button
The MC-01 has six Push-buttons to control the different working modes as explained in these
instructions. The Liquid Crystal Display (LCD) is used to visualize the working data and messages of the
equipment. The LED pilot light is only for indicating the presence of mains supply voltage; in the event that
the mains fuse blows, the pilot light will be off.