DigiTech RP300A - Manual (Page 6)

A Guided Tour of the RP300A
The Front Panel
1. Up/Down Footswitches - These 2 Footswitches are used to select Presets, access the
Tuner, or bypass the RP300A. The Footswitch on the left will decrease, and the
middle Footswitch will increase the Preset number. Pressing both Footswitches
together will bypass the currently selected Preset. Pressing and holding both
Footswitches will access the Tuner.
2. Amp A/B Footswitch - This Footswitch is used to switch between two amp channels for
the selected preset. This switch is also used in conjunction with the Up
Footswitch, to access the Learn-A-Lick mode.
3. Knobs - These knobs perform various functions depending on which mode is currently
active in the RP300A. In performance mode, the knobs control the Amp Gain, Bass
EQ, Mid EQ,Treble EQ, and Master Level. In Edit mode, these knobs adjust the
Parameter values listed directly above each knob for the selected effect. When the
Drum Machine is on, these knobs control the Pattern,Tempo, and Level. In Tuner
mode, these knobs are used to select the desired tuning reference.
4. Select Button - This button is used to enter the Edit mode, and to select individual effects
to be edited. Successive presses of this button will advance through all
available Effects. It is also used to change playback speed in Learn-A-Lick
mode.
5. Drums - The Drums button is used to turn on and off the built-in drum machine. When
the drum machine is active, the Drums LED lights and the selected drum pattern
plays continuously.
6. Matrix - The matrix provides information regarding the current Preset, and Parameter edit
functions. In performance mode, the LEDs running down the left side of the
Matrix will provide a visual indication of which effects are in use for the currently
selected Preset. In Edit mode, the LEDs indicate the Effect currently selected for
editing.
RHYTHM30
2