Daewoo DSD-9502T - Manual (Page 9)

88
Connecting the PVR
SCART connections offer the best picture and sound quality.
They can also tell your TV when the Digital PVR is switched on and off and whether
widescreen pictures are being broadcast. Therefore this is the way this box has been
designed to be connected.
• Make sure your TV is switched off, together with any other equipment you are
connecting to it.
• Insert the cable from your aerial into the Digital PVR socket marked ‘RF IN’.
1. Connect your aerial to the Digital PVR.
Choose the option below that best suits your TV (and VCR, if you have one). If you need a
longer SCART cable, you can find one at most TV or electronics retailers.
Ask for a “fully-populated” SCART lead.
Option 1: connecting to a TV only
• Connect the SCART cable between the ‘TV’ socket on your Digital PVR’s rear panel
and your TV’s SCART socket.
• Connect an RF cable between the ‘RF OUT’ output on the Digital PVR and the RF
socket on your TV (where you normally connect the aerial).
2. Connect the SCART cable.
RF IN
RF OUT
L
R
AUDIO OUT
S/PDIF OUT
TV
VCR
DVD
100-240V-
50/60Hz, 18W
Manufactuered under license from Dolby Laboratories.
"Dolby" and the double-D symbol are
trade marks of Dolby Laboratories. DIGITAL TERRESTRIAL RECEIVER
HARD DISC RECORDER
MADE IN UK
SCART Cable
(Not supplied) RF Cable
AERIAL
TV
DSD-9502T 2006.9.13 2:16 PM ˘ ` 8 mac001 1200DPI 90LPI