Daewoo DSD-9502T - Manual (Page 10)

99
Connecting the PVR
Option 2: connecting to a TV and VCR
• Connect the SCART cable between the VCR socket on your Digital PVR and your
VCR’s SCART IN socket.
• Connect a SCART cable between the SCART TV socket on your Digital PVR and your
TV SCART IN socket.
• Connect an RF cable between the ‘RF OUT’ socket on the Digital PVR and the RF
input socket on your VCR.
• If there isn’t already one in place, connect a second RF cable between the RF output
on your VCR and the RF input socket on your TV.
RF IN
RF OUT
L
R
AUDIO OUT
S/PDIF OUT
TV
VCR
DVD
100-240V-
50/60Hz, 18W
Manufactuered under license from Dolby Laboratories.
"Dolby" and the double-D symbol are
trade marks of Dolby Laboratories. DIGITAL TERRESTRIAL RECEIVER
HARD DISC RECORDER
MADE IN UK
SCART Cable
(Not supplied) RF Cable
AERIAL TV
SCART Cable
(Not supplied)
VCR
3. Connect the POWER cable.
• Switch on your TV
• Switch on the mains outlet for the Digital PVR.
• Press [POWER] on your PVR remote. The PVR’s green light should go on.
• Your TV should switch to the Digital PVR automatically. If no, select the AV channel
using the button on your TV remote marked AV, EXT, TV/AV, O/E or a symbol, or
4. Switch on your TV.
DSD-9502T 2006.9.13 2:16 PM ˘ ` 9 mac001 1200DPI 90LPI