Teac MD-CD1 - Manual (Page 44)

10 – MiniDisc editing—Creating a group
44
TASCAM MD-CD1 Owner’s Manual
Creating a group
The MD-CD1 enables tracks to be divided into
groups on a single MD disc for playback by group.
Refer to “MD group playback” on page 33.
A group is created by specifying track numbers of
the “starting” track and the “ending” track.
1 In stop mode, select the “GRP CREATE?”
option from the EDIT sub-menu of the MD
menu.
“ST Trk> 001” is displayed. This shows the
starting track selection.
2 Use the MULTI JOG dial to select the start-
ing track.
3 Press the ENTER key (or the YES key) on
the front panel, or the ENT/YES key on the
remote control.
“ED Trk>***” is displayed. This shows the
ending track selection.
4 Use the MULTI JOG dial to select the start-
ing track.
5 Press the ENTER key (or the YES key) on
the front panel, or the ENT/YES key on the
remote control.
“Sure?” is displayed.
6 Press the ENTER key (or the YES key) on
the front panel, or the ENT/YES key on the
remote control.
After the specified group is created, “Com-
plete” is shown on the display.
Disc title when creating a group
When creating a group, a disc title containing the
group information or the group title is automatically
created.
For example, if the original title of the disc is “Favor-
ites” and tracks 1 to 4 are combined into a group
titled “Jazz” and tracks 5 to 8 are combined into a
group titled “Latin,” the new title of the disc will be:
0; Favorites//1-4; Jazz//5-8; Latin//
If titles are not given to the disc and the groups, the
new disc title will be:
0; //1-4; //5-8; //
Deleting a group
Groups can also be deleted.
1 In stop mode, select the “GRP CANCEL?”
option from the EDIT sub-menu of the MD
menu.
“GRP No> 01” is displayed.
2 Use the MULTI JOG dial to select the num-
ber of the group to be deleted.
If all the current groups are to be deleted,
select “ALL.”
3 Press the ENTER key (or the YES key) on
the front panel, or the ENT/YES key on the
remote control.
“Sure?” is displayed.
4 Press the ENTER key (or the YES key) on
the front panel, or the ENT/YES key on the
remote control.
After the specified group is deleted, “Com-
plete” is shown on the display.
2ReMD-CD1.fm 44 ページ ２００４年１１月５日 金曜日 午前７時３５分