Teac SL-D920 - Manual (Page 18)

18
3
1
5
4
2
Up to 32 tracks/files can be programmed in the desired
order.
Shuf f le and Intro func tions do not work during
programmed playback.
1 Press the FUNCTION button to select “CD” or
“USB”.
2
Press the PROGRAM button.
“MEMORY” and the programmed number blink on
the display.
< To cancel programmed playback mode, press the
STOP ( H) button.
Program Playback
4
Press a SKIP (
. or /) button repeatedly to
select a track/file, and then press the PROGRAM
button.
The track/file is programmed, and “P02” is shown.
<
Repeat steps 3 and 4 to program more tracks/files.
< You can program up to 32 tracks/files.
< To cancel programming after P01 has been
programmed, press the STOP( H) button twice.
5 When you are done adding tracks/files to the
program, press the PLAY/PAUSE (
G/J) button
to start programmed playback.
3
P r e s s t h e M P 3/ W M A F O L D E R b u t t o n s
repeatedly to select a folder on an MP3/WMA
disc or USB memory.
< MP3/WMA files not stored in folders are treated as
being in the “001” (root) folder.
< Skip this step when playing an ordinary CD.
< When the playback of all the programmed tracks/files
has finished, or the STOP button is pressed twice, the
MEMORY indicator will disappear and programmed
playback mode will be ended.
The program is retained in memor y until you
open the disc compartment cover or the power is
interrupted. You can return to programmed playback
by pressing the PROGRAM button and the PLAY/
PAUSE (
G/J) button.
This unit can record from CDs onto USB memory
devices in a programmed order.
For detailed information on how to record, see page
25.