Teac CD-RW890 - Manual (Page 12)

12
Direct Playback Shuffle Playback
While in stop or playback mode, you can use the numeric buttons of
the remote control unit to select a track.
Playback starts from the selected track.
If the above operation is performed while paused, playback will be <
paused at the beginning of the selected track.
Direct playback is not possible during shuffle playback and
<
programmed playback.
During playback, press the SHUFFLE button so that the tracks can be
played randomly.
In the stop mode, press the SHUFFLE button, then the Play (
y)
button.
When the shuffle playback of all the tracks has been finished, the
unit stops and the shuffle playback mode is cancelled.
If you press the
< / button during shuffle playback, next track will
be randomly selected and played. If you press the
. button, the
currently played track will be played from the beginning. A track
cannot be replayed during shuffle playback.
Shuffle playback does not work during programmed playback and
<
A-B repeat.
A-B repeat does not work during shuffle playback.
<
Shuffle playback works with finalized discs only. <
If one of the following buttons is pressed, shuffle mode will be
<
cancelled:
SHUFFLE (while in the stop mode), OPEN/CLOSE ( L), POWER
When the SHUFFLE button is pressed during REPEAT 1 playback, all <
tracks are played in a random order.
track 7:
track 10:
CD-RW890_E_vA_unlocked.pdf 12 10/09/08 17:17