Checking the firmware version, Cr-h700 – Teac CR-H700 User Manual
Page 2
Z
CR-H700
Release Notes
2
Checking the firmware version
Check the firmware version of your CR-H700 before starting firm-
ware updating procedures.
1
Press the SOURCE button repeatedly to select net-
work mode.
o You can also use the remote control's NET button.
2
Press the BAND button to select “Internet Radio”.
Press the BAND button repeatedly to cycle through the fol-
lowing options.
AMqFMqInternet RadioqMedia Player
o You can also use the remote control's TUNER button.
3
Press the MENU button to select “Setup Menu”.
4
Turn the MULTI JOG knob to select “Information”,
and then press the ENTER button.
The menu item changes as follows:
Device Name Edit q Net work q Information q Software
Update q (Return to) Device Name Edit
5
Turn the MULTI JOG knob to select “Firmware
Version”, and then press the ENTER button.
The firmware version will appear on the display.
Example
Firmware Version
s9129.20051.0