System Fidelity RS-250 - Manual (Page 8)

Remote control functions
RS-250
AM/FM TUNER FUNCTIONS:
(2) 1-10 : Selects stored stations. If
depressed for more than two seconds,
a station is stored under the number
concerned.
(1) Power: Sets the RS-250 in standby
mode.
(6) Autotune: Press once to automatic
tune in to AM/FM stations. Depress
button for two seconds to initiate an
automatic search. At FM, the autotune
function will search for a station at a
higher frequency.
(5) Info: Displays RDS and other
information.
AMPLIFIER FUNCTIONS:
(16) Input buttons: Selects input
source of amplifier.
(4) Function: Adjusts treble/bass level
and balance by means of VOL + and -.
(17) Volume +/-: Adjusts the master
volume.
CD-250
CD-PLAYER FUNCTIONS:
(2) 1-10 : Selects desired track for
playback
(3) Eject: Opens the CD tray.
(12) Program: Allows playback of the
music tracks on a CD in a certain
order.
(5) Stop: Stops playback.
(8) Previous: Selects the previous track.
(7) Next: Selects the next track.
(9) Search back
(10) Search forward
(11) Play/Pause: Starts and pauses
playback.
(15) Repeat: Repeats a single track or
all tracks on a CD.
(1) Power: Sets the CD-250 in
standby mode.
(14)Random: All tracks are played in
random order.
Some of the amplifier functions can only
be performed by means of the remote control. Some functions are connected with the selected
signal input source. Some buttons on the remote control may therefore not be available if the
corresponding signal input source has not been selected.
9