System Fidelity CD-250 - Manual (Page 8)

Remote control functions
ST-250
AM/FM TUNER FUNCTIONS:
(2) 1-10 : Selects stored stations. If
depressed for more than two seconds, a
station is stored under the number
concerned.
(1) Power: Sets the ST-250 in standby mode.
(6) Autotune: Press once to automatic tune
in to AM/FM stations. Depress button for two
seconds to initiate an automatic search. At
FM, the autotune function will search for a
station at a higher frequency.
(5) Info: Displays RDS and other information.
CD-250
CD-PLAYER FUNCTIONS:
(2) 1-10 : Selects desired track for
playback
(3) Eject: Opens the CD tray.
(12) Program: Allows playback of the
music tracks on a CD in a certain order.
(5) Stop: Stops playback.
(8) Previous: Selects the previous track.
(7) Next: Selects the next track.
(9) Search back
(10) Search forward
(11) Play/Pause: Starts and pauses
playback.
(15) Repeat: Repeats a single track or all
tracks on a CD.
(1) Power: Sets the CD-250 in standby
mode.
(14)Random: All tracks are played in random
order.
SA-250
AMPLIFIER FUNCTIONS:
(16) Input buttons: Selects input source of
amplifier.
(4) Function: Adjusts treble/bass level and
balance by means of VOL + and -.
(1) Power: Sets the SA-250 in standby mode.
(17) Volume +/-: Adjusts the master volume.
Some of the amplifier functions can only be
performed by means of the remote control.
Some functions are connected with the
selected signal input source. Some buttons
on the remote control may therefore not be
available if the corresponding signal input
source has not been selected.
9