System Fidelity CD-250 - Manual (Page 12)

13
Forward and rewind
It is possible to perform a search in the track played. If you wish to search forward, depress the
>> (forward search) button on the remote control until you get to that part of the track that you
wish to hear. You will see that the time counter in the display counts up very quickly. If you wish
to search backward, use the same procedure as when you search forward, but use the << (search
back) button instead.
Note:
The search speed will increase the longer you depress the button. When searching, the volume
will be lower than usual. The search function can be activated in pause mode, but no sound will be
heard.
Random
It is possible to select random play by pressing the RANDOM button on the remote control or the
front panel.The CD tracks will be played in random order. The text RANDOM will be displayed
when this function has been activated.
It is possible to activate random play both in stop mode and during playback.
Press the RANDOM button again if you wish to deactivate random play.
Note:
When you press << or >> during random play, it will not be possible to select the next track but
any other track.
Program
The CD-250 can be programmed to play the tracks of a CD in a certain order. Press the PROGRAM
button when playback has been stopped. The MEMORY symbol and “Pr p:01” will be displayed.
Use << and >> to select the track that you wish to include in the programming and confirm your
choice by pressing the PROGRAM button again. This procedure must be repeated until you have
selected all the tracks that you wish to hear.
The tracks that have been selected are shown on the display by means of the music
calendar. It will also be possible to view the total number of tracks programmed by
means of the text “p:09”. (P:09 if you have programmed a total of 9 tracks.)
Press the PLAY button to start playback. Press the STOP button twice to deactivate the
programming function. Then the normal display will return.
Note:
When you press one of the skip buttons, you will select the next track in the programmed order.
Repeat
The CD-250 can be set to repeat one or all tracks of a CD. This is done by means of the REPEAT
button on the remote control or front panel.
If you press the button once, one track will be repeated and the message “REPEAT ONE” will be
displayed.
If you press the button twice, all tracks will be repeated and the message “REPEAT ALL” will be
displayed.
If you wish to deactivate the repeat function, press the REPEAT button for a third time.
Note:
This function can also be used when “Program” has been activated.