Swim'n Play Slim Style Oval Pool - Manual (Page 11)

11
Use the chart on page 6 to find the correct distance from C to C
for your pool. Tie a string on each end from C to C, across the
leveled area to create the center line of the end trenches.
Measure 4 feet from the center line of C towards the inside to
determine the center line of the next trench. Repeat this step
as many times as needed for your pool size.
Important: All trenches must be 4 feet apart from its center.
Carefully dig out each trench.
Measure from center line and dig 3
inches deep for the Bottom Supports
and an additional 1¾” inches for the
square area where the patio block
must be placed (Do not dig the
trenches too large or too deep).
Place the Patio Blocks in the
deepest square area.
Place the Bottom Supports in the
trenches making sure that the end
base is aligned to the edge of the
patio block.
Use a carpenter’s level to make sure
the Bottom Supports are perfectly
level.
4
FT
4 FT
4
FT
Pool Pool Number of Trench
Size Width trenches to Trench
(Each Side)
18 x12 12’ 2 5’ 10”
24 x12 12’ 3 5’ 10”
24 x15 15’ 3 8’ 10”
30 x15 15’ 4 8’ 10”
33x18 18’ 4 11’ 10”
39x18 18’ 6 11’ 10”
45x18 18’ 7 11’ 10”
Trench
to
Trench
String
Pool Width
Stake
C
Stake
C
Stake
C
Stake
C