SVS PLASMA ONE 7 - Manual (Page 6)

Figure 4a: Plasma Lift Mounting on Existing Beams
Figure 4b : Plasma Lift Mounting on Flat Ceiling
SVS PLASMA LIFT INSTALLATION PAGE 6 OF 16
EXISTING
X - UNISTRUT P1000 T
BEAM CLAMP
UNISTRUT P2824
UNSTRUT CHANNEL NUT
P3010 WITH WASHER
AND RETAINING NUT.
8 PLCS.
.3/8" FOR PLASMA LIFT
4 PLCS.
BEAMS
2 PLCS.
2 PLCS.
Y - UNISTRUT P1000 T
3/8" THREADED
RODS 4 PLCS.
M
M
M
PLASMA LIFT MOUNTING
ON EXISTING BEAMS
2 PLCS.
= MOUNTING HOLES M
M
THREADED ROD, 4 PLCS.
ALWAYS FOLLOW THE LOCAL BUILDING
CODES. SVS RECOMMENDS THAT ALL MOUNTING
HARDWARE IS RATED TO HANDLE 4 TIMES
THE WEIGHT OF THE PROJECTOR
AND LIFT OR WHICH EVER NUMBER
IS HIGHER.
DO NOT EXCEED RATING OF
UNISTRUT BY SPANNING TOO GREAT
OF A DISTANCE.
* MOUNTING MATERIALS NOT SUPPLIED BY SVS, INC.
ALWAYS FOLLOW THE LOCAL BUILDING
CODES. SVS RECOMMENDS ALL MOUNTING
HARDWARE BE RATED TO HANDLE 4 TIMES
THE WEIGHT OF THE PROJECTOR
AND LIFT OR WHICH EVER NUMBER
IS HIGHER.
X - UNISTRUT P1000 T
USE 10'LENGTH WHEN
POSSIBLE ON EACH X AXIS
UNSTRUT CHANNEL NUT
P3010 WITH WASHER
AND RETAINING NUT.
8 PLCS.
.375" FOR PLASMA LIFT
2 PLCS.
2 PLCS.
Y - UNISTRUT P1000 T
3/8" THREADED
RODS 4 PLCS.
M M
M
PLASMA ONE LIFT MOUNTING
ON FLAT CEILING
= MOUNTING HOLES M
M
THREADED ROD, 4 PLCS
USE NO LESS THAN EIGHT 1/2"
MACHINE THREAD SHIELDS AND
BOLTS TO SECURE TO CEILING.
MOUNTING MATERIALS NOT SUPPLIED BY SVS, INC.