beautypg.com

Svs plasma one- 7 lift, General description, A. features – SVS PLASMA ONE 7 User Manual

Page 3: B. optional accessories pcc1, Pmt-9

background image

SVS PLASMA ONE- 7 LIFT

GENERAL DESCRIPTION:

The Plasma One-7 supports any plasma
screen up to 200 lbs. and provides an ideal
solution for A/V applications with restricted
ceiling space. The SVS Plasma One Lift only
needs a minimum of 12" of ceiling clearance
to conceal the plasma screen when not in use
(the lift stores the screen horizontally in the
ceiling), pivots 90 degrees down to 4', then
telescopes down to 5'10" or 6'7" below the
ceiling (refers to the distance from the false
ceiling to the bottom of the lift's boom).

A. FEATURES

Minimum Ceiling Space Required for the Lift

12"
(allows 7" for the screen and mount)

Two Positions (Up & Down)

* The plasma Screen is aesthetically stored above
the ceiling for security.
* Easily Lowered to 4' , 5'6" or 6'7" below the
ceiling for show

Lifting Capacity

Up to 200 lbs.

Lift's Weight

130 lbs.

Maximum Plasma Screen Size

72"W x 55"H

Tilt

90º from the false ceiling

Low Voltage Controller

Supplied with 75' of cable (22 gauge/5
conductor) and a decora plate.

Precision Grooved Drum

Insures quiet and consistent cable pick-up and
release.

Patented Fail Safe Drum Lock System

Insures safety in the event of mechanical failure.
100% safety record after 12+ years of
manufacturing

Quiet & Strong Motor

Extra quiet for meetings and presentations or
simply for home use.

Note: Features are subject to change without notice

B. OPTIONAL ACCESSORIES
PCC1

Ceiling Closure Framework kit installed underneath the screen and used to attach to the

closure material (not supplied by SVS, Inc.) On-site customization will be needed,

ceiling

hole

dimensions will be based on the size of the plasma screen.

PMT-9

Fixed mounting bracket used to attach the plasma screen to the boom of the lift (model
varies with plasma screen model).

SVS PLASMA LIFT INSTALLATION

PAGE 3 OF 16

12" FROM CEILING

AND THE CLOSURE

HINGE TO TOP

OF LIFT.

4' OR 6'7" FROM

CEILING TO BOTTOM

OF PLASMA SCREEN

AFFECT OVERALL DIMENSIONS

ACCESSORIES/PROJECTOR MAY

NOTE: FOR REFERENCE ONLY-

4 FT.

POSITION

TO 5'10" or 6'7" FT.

POSITION