SVS 7 110V - Manual (Page 13)

11. CABLE MANAGEMENT
Cable Management is used to keep projectors cables away from the scissors during Lift operation. Do not attach
the projector cables to the scissors of the Lift as they could be repeatedly pinched when the Lift raises and
lowers. See Figure 11.
a. Cable Retainers
Cable Retainers are standard equipment on SVS 7-9, SVS 7-11, AND SVS 7-13 Lifts. The Cable Retainers are
installed on scissor extensions in the rear of the Lift. If your Lift is equipped with Cable retainers attach the
projector cables as demonstrated in Figure 12.
SVS 7 Lift Installation Instructions Page 13 of 18
Figure 11. Cable Retainers (Left) and Cable Retractor (Right)