Fpga pin-out, Bibliography – Sundance SMT395 User Manual
Page 25
Version 1.1.7
Page 25 of 26
SMT395 User Manual
FPGA Pin-Out
See board schematics.
Bibliography
1. Peripherals Reference Guide (literature number SPRU190)
Describes common peripherals available on the TMS320C6x digital signal processors. This book
includes information on the internal data and program memories, the external memory interface
(EMIF), the host port, multichannel-buffered serial ports, direct memory access (DMA), clocking
and phase-locked loop (PLL), and the power-down modes.
2. TIM-40 MODULE SPECIFICATION Including TMS320C44 Addendum
ftp://ftp2.sundance.com/Pub/documentation/pdf-files/tim_spec_v1.01.pdf
3. SDB Technical Specification
ftp://ftp2.sundance.com/Pub/documentation/pdf-files/sdb_tech_spec.pdf
4. SHB Technical Specification
ftp://ftp2.sundance.com/Pub/documentation/pdf-files/SHB_Technical_Specification_v1_0.pdf
5. TMS320C4x User's Guide (literature number SPRU063)
Describes the C4x 32-bit floating-point processor, developed for digital signal processing as well
as parallel processing applications. Covered are its architecture, internal register structure,
instruction set, pipeline, specifications, and operation of its six DMA channels and six
communication ports. Software and hardware applications are included.
6. Xilinx Virtex-II Pro data sheet:
7. General firmware description:
ftp://ftp2.sundance.com/Pub/documentation/pdf-files/External_Interface_User_manual.pdf