Sundance SMT9650 - Manual (Page 14)

Document No.
S M T 9 6 5 0 U s e r G u i d e
Revision
3 . 0
Date
2 9 D e c 2 0 0 6
Page
14 of 36
1.6 BUILDING THE DEMONSTRATION
You should start by reading the PARS documentation to understand the build process.
1. Open Matlab and give the command PARSOptions at the >> prompt, then use the resulting
dialogue to select and then Accept your DSP hardware. In this example it will be
SMT374_6713_300.
2. Give the command PARS at the >> prompt.
3. In the PARS window, click on >> and browse to the demonstration model demo1.mdl.
4. Select the file, click Open, and then click the PARS command Open model. The should open a
demo1_PARS window.
5. Click Generate in the PARS window. This should start the build process which will continue with
activity in several windows. Eventually it should finish and report “System generation
successfully finished”. Click OK to dismiss the report.
6. The file demo1_PARS.app should have been created in a new sub folder, demo1_PARS, of the
folder containing the original model.
1.7 RUNNING THE DEMONSTRATION
Start Labview and select File/Open, then browse to the folder containing the demonstration VI,
Demo1.vi. Double click on Demo1.vi to open it. This should bring up the following window: