Sundance SMT9650 - Manual (Page 13)

Document No.
S M T 9 6 5 0 U s e r G u i d e
Revision
3 . 0
Date
2 9 D e c 2 0 0 6
Page
13 of 36
1.5.3. chan2mux
This is a wrapper for a task with the same name from the SMT6045. This task multiplexes input data into
several outputs.
Figure 3: Parameter window for chan2mux task.
● Place task on: specify the processor on which this task should be placed.
● Task memory size: the amount of memory that will be assigned for this task's stack and heap.
Since this task allocates a lot of memory to buffer input data, you need to make sure that enough
memory is assigned.
● Input channel: If a value is entered in this field, PARS will use it as an input for task (the
Simulink model is changed and the input will disappear). If no value is entered in this field, then a
virtual channel is assumed for input.
● Sample per line: the number of samples in each line.
● Lines per frame: the number of lines in each frame.
● Number of output channels: the number of output channels into which the input will be divided.