Sundance SMT8091 - Manual (Page 5)

1 Introduction
The SMT8091 is a single-C6416T based module (SMT395VP) combined with a dual
high-speed ADC module (SMT391-VP composed of SMT338-VP and SMT391).
SMT395VP characteristics:
⇒ Single TMS320C6416T processor running @ 1GHz (32 bits)
⇒ Six 20MB/s communication ports (comports)
⇒ Up to 256MBytes of SDRAM @ 133MHz
⇒ 8MByte Flash ROM for boot code and FPGA programming
⇒ Global expansion connector
⇒ General purpose I/O connector
⇒ High bandwidth data I/O via 2 Sundance High-speed Buses (32-bit SDB
interfaces)
⇒ 8 Rocket Serial links @ 2Gbit/s per lane for inter-module communications
SMT391-VP characteristics:
⇒ Dual 8-bit ADC ( AT84AD001 ) sampling at up to 1Gsps via LVDS bus ( SLB )
⇒ Two Sundance High-speed Bus (SHB) connectors
⇒ Two 4-channel Rocket Serial Link ( RSL ) connector – 2.5Gbit/s per lane
⇒ Two 20 MBytes/s communication ports (comport)
⇒ Low-jitter on-board system clock
⇒ Xilinx Virtex-II Pro FPGA (VP30-6)
⇒ 128MB DDR SDRAM
⇒ 50-Ohm terminated analogue inputs and outputs, external triggers and
clocks via MMCX or MMBX (Huber and Suhner) connectors
⇒ User defined pins for external connections
⇒ Compatible with a wide range of Sundance SHB modules
⇒ TIM standard compatible
User Manual SMT8091 Page 5 of 16 Last Edited: 15/09/2006 11:54:00