Sundance SMT148FX - Manual (Page 48)

19 Safety
This module presents no hazard to the user when in normal use.
20 EMC
This module is designed to operate from within an enclosed host system, which is
built to provide EMC shielding. Operation within the EU EMC guidelines is not
guaranteed unless it is installed within an adequate host system.
This unit is protected from damage by fast voltage transients originating from
outside the host system which may be introduced through the output cables.
Short circuiting any output to ground (except the bi-directional reset output) does
not cause the system to lock up or reboot.
21 Ordering Information
Several variations of this product are available.
SMT148-FX-DC Standard
product with on-board voltage converters.
SMT148-FX-ATX Standard product with ATX PSU input connector.
SMT148-FX-nn-Fxxx With additional local ADC oscillator. xxx refers to the
oscillator frequency. nn refers to power input type.
User Manual SMT148FX Page 48 of 48 Last Edited: 03/08/2009 11:42:00