J30 – flash write protect, J27, j28 – com cpld user i/o, J21,j24 – virtext boot mode – Sundance SMT128 User Manual
Page 12: J27,j28 – com cpld user i/o
Preliminary
Page 12 of 15
SMT128 User Manual
J21, J24 – Virtex boot mode
With J21 in and J24 out, the SMT128 will boot from a serial prom. When booting
from X-checker header remove J21. J24 with reset the serial prom when in and may
be fitted when booting from x-checker if the serial prom is still fitted in the IC socket.
J30 – Flash Write Protect
This jumper must be fitted to permit write cycles to be accepted by the SMT128
FLASH memory.
J27, J28 – Com CPLD User I/O
These are connected to the SMT128 com-port CPLD for future expansion.
See also other documents in the category Sundance Equipment:
- SMT107 (16 pages)
- SMT6035 v.2.2 (39 pages)
- SMT6012 v.4.6 (22 pages)
- FC100 (12 pages)
- FC108 v.1.1 (10 pages)
- SMT6065 v.4.0 (45 pages)
- FFT v.2.1 (19 pages)
- SMT111 (18 pages)
- SMT118LT (10 pages)
- SMT118 (20 pages)
- SMT123-SHB (13 pages)
- SMT145 (18 pages)
- SMT148 (35 pages)
- SMT130 v.1.0 (46 pages)
- SMT148FX (48 pages)
- SMT310Q (55 pages)
- PARS (70 pages)
- SMT166-FMC (52 pages)
- SMT166 (44 pages)
- SMT300Q v.1.6 (61 pages)
- SMT310 v.1.6 (50 pages)
- SMT317 (24 pages)
- SMT326v2 (24 pages)
- SMT338 (19 pages)
- SMT349 (32 pages)
- SMT339 v.1.3 (27 pages)
- SMT338-VP (22 pages)
- SMT358 (25 pages)
- SMT351T (37 pages)
- SMT351 (25 pages)
- SMT350 (45 pages)
- SMT362 (30 pages)
- SMT365G (23 pages)
- SMT364 (37 pages)
- SMT373 (15 pages)
- SMT368 (24 pages)
- SMT370v3 (46 pages)
- SMT377 (22 pages)
- SMT381 2007 (31 pages)
- SMT381-VP (81 pages)
- SMT387 (42 pages)
- SMT391 (18 pages)
- SMT384 (47 pages)
- SMT390-VP (55 pages)