SONOSAX MINIR82 User Manual
Page 3
SONOSAX MINIR82
- User interface V4.2
Page 3 de 32
1. INTRODUCTION
This manual describes the user interface, the operating instructions and all functionalities related to the
Firmware version 4.2
2. POWERING THE UNIT
External PSU:
use only the optional SONOSAX power supply.
Batteries:
use only rechargeable NiMh batteries; standard dry cell batteries can not safely power the
MINIR82. Insert batteries as shown in the picture below.
External DC supply: The MINIR82 can also be supplied from an external suitable DC source from 5 to 9 V.
A 2-meter long cable with the DC plug is available, part number V980010. For use with high capacity 12V
battery, a 9V to 18V DC/DC converter is available.
Powering On
Press simultaneously the UP and DOWN keys to turn ON the MINIR82
A boot up screen is displayed for approx. 2 seconds and shows the following information:
• The remaining free available space on the hard disc and on the Compact Flash card
• A power indication of either the batteries or the external PSU by means of a bar graph
• Date and Time
• The firmware version