SONOSAX MINIR82 - Manual (Page 12)

SONOSAX MINIR82 - User interface V4.2 Page 12 of 32
4.1 MONITORING
The [MONITORING] page is used to select, route and mix the 10 tracks of the MINIR82 to its headphone
output. The pair [A-B] represents the two tracks of the CF Card.
The monitoring is configured either by selecting a pair of tracks or by selecting each track individually by
moving the cursor. The selected field is shown in reversed video.
Pressing briefly on a key will move the cursor to select the field.
A long pressure on the RIGHT key scrolls the monitoring mode of the selected field.
Selection per pair Individual Sélection
OFF / MONO / STEREO -- / L / C / R /--
REV-STEREO / MS / OFF
Actions of the keys:
Keys Short
pressure Long pressure
LEFT Move the selector to the left Keep the current configuration and return to the
main menu
RIGHT Move the selector to the right Select the monitoring mode
UP Move the selector to the upward
DOWN Move the selector to downward
4.1.1 Saving the configurations [PRESET]
Up to 4 different monitoring configurations can be stored and recalled at any time. Any configuration is
possible and is freely defined by the user.
To recall a configuration, select a [
PRESET] 1 to 4
and press long on the RIGHT key
To store the displayed configuration; select any [ STORE] 1 to 4
and press long on RIGHT key
NOTE: the
active [PRESET] is posted in a black square. The black square disappears if the current
(displayed) configuration does not correspond to a stored
[PRESET], or if the configuration is
modified.