SOMFY OXIMO - Manual (Page 2)

General Information
STEP 1
Wake the motor by pressing
the
UP and DOWN buttons
simultaneously until the
motor jogs.
Note: After every command
the motor will jog to confirm.
STEP 2
Check the direction of rotation
with the
UP or DOWN button. If
needed, change the direction of
rotation by pressing and holding
the
MY button until the motor
jogs.
STEP 3
Run the motor to the desired
upper limit. Press the
MY and
DOWN buttons simultaneously
until the motor starts to run
downward. Use the
MY button
to stop the motor.
STEP 4
Press and hold the
MY button
until the motor jogs to confirm
the limit setting.
STEP 5
Press and hold the
PROGRAM
button on the back of the
transmitter until the motor jogs.
The buttons no longer have to be
held for the motor to run. The
motor will auto detect the non-set
limit from the physical stop.
Top Limit Set by User, Bottom Limit Auto Set To allow the OXIMO to auto set the bottom limit,
the product must have rigid links.
STEP 1
Wake the motor by pressing
the
UP and DOWN buttons
simultaneously until the
motor jogs.
Note: After every command
the motor will jog to confirm.
STEP 2
Check the direction of rotation
with the
UP or DOWN button. If
needed, change the direction of
rotation by pressing and holding
the
MY button until the motor
jogs.
STEP 3
Press the
UP and DOWN buttons
simultaneously until the motor
jogs.
STEP 4
Press and hold the
MY button
until the motor jogs to confirm
the limit setting.
STEP 5
Press and hold the
PROGRAM
button on the back of the
transmitter until the motor jogs.
The buttons no longer have to
be held for the motor to run. The
motor will auto detect the non-set
limit from the physical stop.
Auto Set Both Limits
To allow the OXIMO to auto set its limits, the product
must have rigid links and bottom stops.
ADJUSTING THE LIMITS AFTER THE MOTOR HAS BEEN PROGRAMMED.
To change the upper limit, run the motor to its upper limit and let it stop. Press the UP and DOWN buttons simultaneously until the motor jogs.
Run the motor to the new desired upper limit. Press and hold the
MY button until the motor jogs. Check the new limit.
To change the lower limit, run the motor to its lower limit and let it stop. Press the UP and DOWN buttons simultaneously until the motor jogs.
Run the motor to the new desired lower limit. Press and hold the
MY button until the motor jogs. Check the new limit.
Rigid link at top,
no bottom stop
Rigid link at top,
bottom stop