Smithco Big Vac V72E (sn 73001 – 73020) Parts & Service Manual - Manual (Page 6)

4
Service
MAINTENANCE
Before servicing or making adjustments to machine, stop engine on tow vehicle and remove
key from ignition.
Use all procedures and parts prescribed by the manufacturer's. Read the engine manual
before operation.
LUBRICATION
Use No. 2 General Purpose Lithium Base Grease and lubricate DAILY. The Big Vac has 13 grease fittings. All
bearings are sealed bearings. When inserting grease, be careful not to ruin the seal, if this happens, replace the
bearing at once. Be sure to wipe grease fitting clean before injecting grease. Give only one or two pumps of
grease at each lubrication.
REF# LOCATION
1 One on all four castor wheels.
2 Two on the fan shaft.
3 One on each mounted bearing for reel shaft.
4 One on all four castor wheel mount brackets.
5 One on the jack stand.
STORAGE
1.Before storing clean machine thoroughly.
2. Check bolts and nuts, tighten as necessary.
3. Make all repairs that are needed and remove any debris.
4. Store in a clean and dry area.