Smithco Spray Star 3180 (sn 300G056 – 300G065) Parts & Service Manual - Manual (Page 101)

99
Accessories
30-006 FRESH WATER TANK PARTS LIST
REF# PART# DESCRIPTION QUANTITY
1 HB-516-18-075 Bolt 5 /
16
- 18 x 3 /
4
4
HW-516 Washer 5 /
16
4
HWL-516 Lock Washer 5 /
16
4
2 30-111 Tank Mount Bracket 1
3 HB-516-18-150 Bolt 5 /
16
- 18 x 1 1 /
2
2
HNFL-516-18 Flange Lock Nut 5 /
16
- 18 2
4 10-234 3 Gallon Rectangular Tank 1
5 16-158 Close Nipple 3 /
4
x 3 /
4
1
6 16-960 Spigot 3 /
4
NPT 1
7 16-151 Elbow FPT 3 /
4
x 3 /
4
1
8 30-110 Mount Bracket ( part of machine) 1
INSTALLATION INSTRUCTIONS
1. Fresh Water Wash Tank mounts on the rear of the machine.
2. Clamp the mount bracket to the Mount Bracket and mark the holes onto the tube with a center punch.
Drill the two holes using a 3 /
8
drill bit.
3. Secure the bracket to the post with two 5 /
16
x 1 1 /
2
bolts and flange lock nuts. Then tighten.
4. Install the nipple (Ref 5), elbow (Ref 7) and spigot (Ref 6) into the bottom of wash tank (Ref 4). Use
thread tape on all threads.
5. Mount the tank onto the mount bracket (Ref 2) using four 5 /
16
x 3 /
4
bolts, washers and lockwashers.
Tighten.
6. Rinse tank with clear water and check for leaks around fittings.
This tank is for fresh clear water ONLY. Do not put chemicals in this tank.