Denon DVD-3930CI - Manual (Page 31)

ENGLISH
ENGLISH
28
[ ENTER ]
[ PURE DIRECT
SELECT]
[ D H ]
[ PURE DIRECT
MEMORY]
About the button names in this explanation
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
Other settings
In the stop mode, press [PURE DIRECT MEMORY] .
• The pure direct memory screen appears.
1
Use [D D H H] to select “MODE 1” or “MODE 2”, then
press [ENTER] .
2
Use [D D H H] to select the item you want to set, press
[ENTER] , then use [D D H H] again to make the setting.
3
Press [PURE DIRECT MEMORY] .
• The settings are stored at “MODE 1” or “MODE 2”.
4
Using the pure direct mode
Use this function to stop output of video signals, etc., and output only
the analog audio signals to achieve high quality sound.
DIGITAL OUTPUT:
• ON (Upon purchase), OFF:
Select whether or not to output signals to the digital audio output
terminals.
The DENON LINK digital output circuitry does not function.
VIDEO OUT:
• ON (Upon purchase), OFF:
Select whether or not to output video signals.
DISPLAY:
• ON (Upon purchase), OFF:
Select whether or not to light the DVD-3930CI’s display.
Press [PURE DIRECT SELECT] and select the setting
mode.
• The mode is indicated on the display.
5
NORMAL:
All signals are output.
MODE 1:
The player operates as per the settings stored at “MODE 1”.
MODE 2:
The player operates as per the settings stored at “MODE 2”.
ALL OFF:
Only the analog audio signals are output.
2
3
• With HDMI connections, no video or audio signals are output from
the HDMI terminals if “VIDEO OUT” is set to “OFF” in step 3 or if
the “ALL OFF” mode is selected in step 5 .