beautypg.com

Denon DVD-3930CI User Manual

Page 25

background image

ENGLISH

ENGLISH

Making the initial settings

Making the initial settings

22

Use

[D

D H

H]

to select the item to be set, then press

[ENTER]

.

2

Use

[D

D H

H]

to select “PIXEL CROPPING”, then press

[ENTER]

.

1

OFF (Upon purchase):
Select this when a regular consumer TV is connected.

Set the horizontal display range with respect to the interlaced output.

ON:
When a professional monitor is connected, select this if the image’s
synchronization is disturbed.

1

2

Use

[D

D H

H]

to select the item to be set, then press

[ENTER]

.

2

Use

[D

D H

H]

to select “AUDIO CHANNEL”, then press

[ENTER]

.

1

MULTI CHANNEL (Upon purchase):
Select this when using 3 or more speakers. The “SPEAKER
CONFIGURATION”, “CHANNEL LEVEL” and “DELAY TIME”
setting screens appear.

Set the audio output.

2CH (VSS OFF):
Select this when using 2 speakers and a Dolby Pro Logic decoder
(Dolby Pro Logic compatible amplifier).

2CH (VSS1 ON):
This setting provides a natural surround effect in a system with 2
speakers connected.

1

Setting the horizontal display range

Setting the audio channels

• The procedure for making the “SPEAKER CONFIGURATION”,

“CHANNEL LEVEL” and “DELAY TIME” settings is the same as
when “MULTI (LPCM)” is selected at “HDMI AUDIO SETUP” (
page 17).

• When “ON” is selected for “SW+10dB” at “CHANNEL LEVEL”,

the volume of the sound output from the subwoofer can be set 10
dB higher.

2CH (VSS2 ON):
This settings provides a stronger surround effect in a system with 2
speakers connected than VSS1.

2

Audio settings (

)

Use

[F

F G

G]

to select “

”.

¢ About V.S.S. (Virtual Surround Sound)

• Using the V.S.S. function lets you enjoy a surround effect with only

2 speakers (left and right).

• This function is only effective for DVDs recorded in Dolby Digital,

DTS, MPEG, LPCM with 2 or more channels.

• For some discs the effect may be weak or there may be no effect

at all.

• For some discs the sound may be distorted when using this

function. If so, set the V.S.S. function to “OFF”.

• Cancel other surround functions (for example, the TV’s surround

mode) when using this function.

• The effect is stronger if the listening position is approximately 3 to 4

times the distance of the space between the front speakers (or the
sideways width of the TV when using the TV’s speakers).