English – Denon DVD-3930CI User Manual

Page 14

HDMI audio setting

Device to be connected

Connections

ENGLISH

DENON LINK connections

DENON

LINK

When connected to a DENON LINK-compatible AV amplifier, the multi-channel signals of DVD-Audio
discs, Super Audio CDs, etc., can be transferred as such in digital format.

Connection to a device with an HDMI terminal

HDMI

Connecting the DVD-3930CI to device with an HDMI terminal using an HDMI cable (sold separately)
enables digital transfer of both digital video signals and multi-channel audio signals.

HDMI audio

Audio recording format

Disc type

¢ Audio setting of device to be connected with an HDMI terminal (

page 17)

2CH

MULTI

(LPCM)

MULTI

(NORMAL)

The multi-channel audio signals are output from the analog
audio output and DENON LINK terminal.
Down-mixed 2-channel audio signals are output from the HDMI
output terminal.

The DTS or Dolby Digital signals can be decoded by the
connected TV or AV amplifier.
(The HDMI audio speaker setting, etc., cannot be made.)

Multi-channel audio signals are output from the HDMI terminal.
The HDMI audio speaker setting, etc., can be made.

Device compatible with DTS or
Dolby Digital decoding

Device compatible with 3 or
more channels of audio inputs
(not DTS or Dolby Digital
compatible)

Device compatible with 2-
channel audio input or device
not compatible with audio
input

DVD-Audio

Dolby Digital

DTS

PCM

LPCM or PPCM

Video CD

Music CD

MP3 CD

2-channel PCM

Multi PCM

2CH

MULTI (NORMAL)

MULTI (LPCM)

2-channel PCM

Multi PCM

DVD-Video

Dolby Digital

DTS

2-channel PCM

WMA CD

Super audio CD

Multi PCM

2-channel PCM

No output

2-channel PCM

Multi PCM

2-channel PCM

Stereo area

Multi area

CD layer

¢ For a TV, amplifier, etc.

Status of signal from

the DVD-3930CI’s HDMI

output terminal

DVI-D-compatible monitor

(Not HDCP compatible)

DVI-D-compatible monitor

(HDCP compatible)

HDMI-compatible monitor

¢ Connection with an HDMI/DVI-D conversion cable (adapter)

• HDMI video streams (video signals) are compatible with DVI-D.

The DVD-3930CI can be connected to a TV with a DVI-D terminal using an HDMI/DVI-D conversion
cable (adapter), but depending on the combination of devices in some cases no picture will be output.

• When using an HDMI/DVI-D conversion adapter, the picture may not be output properly due to poor

contact with the connected cable.

Only video signals output

Neither video nor audio

signals output

Both video and audio

signals output

* The video signals are only output in RGB format.

• Digital transfer is possible up to 24 bit/2ch for 192/176.4 kHz, 24 bit/6ch for 96 kHz or less.
• When making DENON LINK connections, be sure to check the version of the AV amplifier to be

connected then make the “DENON LINK” setting at “initial settings” appropriately (

page 19). If two

DENON LINK terminals of different versions are interconnected, there may be no sound or only noise.

• When “DENON LINK” is set, downmixed audio signals are output from the DVD-3930CI’s analog audio

output terminals (L/R and FL/FR). When using the 5.1-channel analog audio terminals, set the “DENON
LINK” setting in the initial settings to “OFF”.

• The DVD-3930CI’s speaker settings are invalidated when the DENON LINK terminal is connected. (Make

the speaker settings on the AV amplifier to which the DVD-3930CI is connected.)

• With the DENON LINK 2nd connection, Super Audio CD’s multi and stereo signals are not output from

the DENON LINK terminal. Please use the analog audio output terminals.

Monitor or

AV amplifier