Smithco Super Star 42-00x (sn 4841 – 4984/12712 – 12799) Parts & Service Manual - Manual (Page 81)

79
Accessories
42-210 GRADER BLADE PARTS LIST
REF# PART# DESCRIPTION QTY
1 HHP-18 Bridge Pin 1 /
8
2
2 42-207 Grader Blade 1
A 42-211 Right Blade Clip 1
B HSTP-516-18-075 Phillips Truss Head Screw 5 /
16
- 18 x 3 /
4
4
HWL-516 Lock Washer 5 /
16
4
HN-516-18 Nut 5 /
16
- 18 4
C 42-216 Left Blade Clip 1
INSTALLATION INSTRUCTIONS
1. Install Grader Blade to Attachment Lift by sliding tabs onto clevis pins and secure with bridge pins.
2. Install right and left blade clips (Ref A and C) on seat panel. If holes need to be drilled, drill (4) 11 /
32
holes
5.75" off each side of center back and 1" and 3 1 /
2
" up from the bottom. Blade clips are for grader blade
(Ref 8) storage when not in use. Place notches on the top of the grader blade into slots on blade clips.
3. Turn machine on and test for proper operation.