111 drag mat kit drawing, Installation instructions – Smithco Super Rake 13-55х (sn 6329 – 6449/1136 -1199) Parts & Service Manual User Manual
Page 79

77
Accessories
13-111 DRAG MAT KIT DRAWING
REF#
PART#
DESCRIPTION
QUANTITY
1
HHP-18
Bridge Pin 1/8
1
2
Hitch (Part of Tr
a
p
Rake)
1
3
Rake Lift (Part of Trap Rake)
1
4*
HB-38-16-225
Bolt 3/8 - 16 x 21/4
4
HWL-38
L
o
c
kwasher 3
/
8
4
HN-38-16
Nut 3/8 -
1
6
4
5*
13-195
Left M
a
t
Carrier Post
1
6
19-605
Drag Mat Chain
1
7
19-601
Drag Mat
1
8*
13-156
Right Mat Carrier Post
1
9*
13-157
Carrier Lock Strap
2
*
13-112
Carrier Kit, posts with hardware
(includes all * items)
1
INSTALLATION INSTRUCTIONS
1. Looking from the rear of the trap rake, mount the mat carrier post (Ref 8) outside the right rear corner of
the rake lift with the lock strap (Ref 9) on the inside of the rake lift side plate. Bolt into place with two bolts,
nuts and lockwashers (Ref 4).
2. Mount the left mat carrier (Ref 5) outside the left corner similar to the right side with the lock strap (Ref 9)
to the inside.
3. To carry the mat, roll it up and place it in the brackets of the carrier posts.
4. To use the mat, unroll it flat and hook it up to the trap rake hitch with the clevis pin and bridge pin.