Smithco Super Rake 13-55х (sn 6329 – 6449/1136 -1199) Parts & Service Manual - Manual (Page 71)

69
Accessories
13-107 SCARIFIER WITH CHISEL BLADES PARTS LIST
To be used with 13-107 Scariefer with Chisel Blades and 13-577 Scarifier with Vertical Blades
REF# PART# DESCRIPTION QUANTITY
1 13-117 Grader Blade 1
2 HCP-12-150 Clevis Pin 1 /
2
x 1 1 /
2
2
3 HHP-18 Bridge Pin 1 /
8
3
4 13-115 Hitch (Pistols) 2
5 HMB-34-10 Machine Bushing 3 /
4
x 10GA 12
6 HMB-12-14 Machine Bushing 1 /
2
x 14GA 4
7 HP-18-100 Cotter Pin 1 /
8
x 1 1
8 HB-38-16-100 Bolt 3 /
8
- 16 x 1 9
9 13-114 Digger Blade 9
10 13-113 Frame 1
11 HNCL-38-16 Center Lock Nut 3 /
8
- 16 9
12 HRP-14-100 Roll Pin 1 /
4
x 1 2
13 Attachment Lift (part of Lift Assembly)
14 HB-716-14-150 Bolt 7 /
16
- 14 x 1 1 /
2
2
HNTL-716-14 Lock Nut 7 /
16
-14 2
15 19-217 Transportation Hook 1
INSTALLATION INSTRUCTIONS
Optional Lift Assembly 13-505 must be installed before installing this unit on Super 2.
1. Slide the transportation hook over the right tube of the frame (Ref 2). Insert bridge pin (Ref 12) in hook
for use when required later.
2. Using nine bolts (Ref 10) and nuts (Ref 7) attach digger blades (Ref 8) to frame.
3. Insert hitch (pistols) (Ref 13) into tubes of frame with up to five machine bushings (Ref 5) in front and
one bushing in the rear of tube. Secure pistols with roll pins (Ref 6) . Check spacing before driving in roll
pin all the way. For more tire clearance, machine bushings may be moved from front to rear.
4. Attach grader blade (Ref 1) to frame (Ref 2) as shown using machine bushing (Ref 9) and cotter pin (Ref
11) .
5. Lift grader blade/frame unit (Ref 1 and 2) and hook pockets over the arms of attachment lift (Ref 4).
6. Attach pistols to the tabs of the trap rake frame undercarriage in the rear holes using clevis pins (Ref 14),
machine bushings (Ref 12) and bridge pins (Ref 14).
7. Turn machine on and test for proper operation.