Smithco Super Rake 13-55х (sn 6201 – 6279/1080 – 1120) Parts & Service Manual - Manual (Page 107)

105
Accessories
26-007 PROFESSIONAL INFIELD FINISHER PARTS LIST
REF# PART# DESCRIPTION QUANTITY
1 Rake Holder (Part of Trap Rake) 1
2 Rake Lift (Part of Trap Rake) 1
3 HP-18-100 Cotter Pin 1 /
8
x 1 1
4 HCP-12-150 Clevis Pin 1 /
2
x 1 1 /
2
1
5 HB-58-11-300 Bolt 5 /
8
- 11 x 3 2
HNCL-58-11 Center Lock Nut 5 /
8
- 11 2
6 13-365 Drawbar 1
7 26-045 Leveling Screen 1
8 HCP-12-450 Clevis Pin 1 /
2
x 4 1 /
2
1
9 HMB-12-14 Machine Bushing 1 /
2
x 14GA 1
10 19-107 Hitch 1
11 HHP-18 Bridge Pin 1 /
8
1
PROFESSIONAL INFIELD FINISHER INSTALLATION
The Professional Field Finisher is used for smoothing and leveling fields to professional standards.
1. Attach (Ref# 7) Leveling Screen to (Ref# 6) Drawbar using two (Ref# 5)Bolts and Center Lock Nuts.
2. Attach (Ref# 10) Hitch to (Ref# 6) Drawbar using (Ref# 8) 1 /
2
x 4 1 /
2
Clevis Pin, (Ref# 9) 1 /
2
x 14GA
Machine Bushing and a (Ref# 3) 1 /
8
x 1 Cotter Pin.
3. Mount Professional Field Finisher to the hitch on the trap rake with a (Ref# 4) 1 /
2
x 1 1 /
2
Clevis Pin and
(Ref# 11) 1 /
8
" Bridge Pin.
4. Hook chains from Finisher to Rake Lift Arms.
5. NOTE: When assembled properly, rake will angle down from front to back. If front of finisher is not
higher than the back, damage will result to infield.