Smithco Diesel Super Rake 17-001-B (sn 2564 – 2620) Parts & Service Manual - Manual (Page 91)

89
Accessories
26-007 PROFESSIONAL INFIELD FINISHER PARTS LIST
REF# PART# DESCRIPTION QUANTITY
1 13-194 Rake Holder (Part of Trap Rake) 1
2 Rake Lift (Part of Trap Rake) 1
3 HP-18-100 Cotter Pin 1 /
8
x 1 1
4 HCP-12-150 Clevis Pin 1 /
2
x 1 1 /
2
1
5 HB-58-11-300 Bolt 5 /
8
- 11 x 3 2
HNCL-58-11 Center Lock Nut 5 /
8
- 11 2
6 13-365 Drawbar 1
7 26-045 Leveling Screen 1
8 HCP-12-450 Clevis Pin 1 /
2
x 4 1 /
2
1
9 HMB-12-14 Machine Bushing 1 /
2
x 14GA 1
10 19-107 Hitch 1
11 HHP-18 Bridge Pin 1 /
8
1
INSTALLATION INSTRUCTIONS
The Professional Field Finisher is used for smoothing and leveling fields to professional standards.
1. Attach leveling screen (Ref 7) to drawbar (Ref 6) using two bolts (Ref 5) and center lock nuts.
2. Attach hitch (Ref 10) to drawbar (Ref 6) using clevis pin (Ref 8), machine bushing (Ref 9) and a cotter
pin (Ref 3).
3. Mount Professional Field Finisher to the hitch on the trap rake with a clevis pin (Ref 4) and bridge pin
(Ref 11).
4. Hook chains from finisher to rake lift arms.
5. NOTE: When assembled properly, rake will angle down from front to back. If front of finisher is not
higher than the back, damage will result to infield.