111 drag mat kit parts list, Installation instructions, Accessories – Smithco Diesel Super Rake 17-001-B (sn 2564 – 2620) Parts & Service Manual User Manual
Page 73
71
Accessories
13-111 DRAG MAT KIT PARTS LIST
REF#
PART#
DESCRIPTION
QUANTITY
1
HHP-18
Bridge Pin
1
/
8
1
2
Hitch
(Part of Trap Rake)
1
3
Rake Lift
(Part of Trap Rake)
1
4*
HB-38-16-225
Bolt
3
/
8
- 16 x 2
1
/
4
4
HWL-38
Lockwasher
3
/
8
4
HN-38-16
Nut
3
/
8
- 16
4
5*
13-195
Left Mat Carrier Post
1
6
19-605
Drag Mat Chain
1
7
19-601
Drag Mat
1
8*
13-156
Right Mat Carrier Post
1
9*
13-157
Carrier Lock Strap
2
*
13-112
Carrier Kit, posts with hardware
(includes all * items)
1
INSTALLATION INSTRUCTIONS
1. Looking from the rear of the trap rake, mount the mat carrier post (Ref 8) outside the right rear corner of
the rake lift with the lock strap (Ref 9) on the inside of the rake lift side plate. Bolt into place with two bolts,
nuts and lockwashers (Ref 4).
2. Mount the left mat carrier (Ref 5) outside the left corner similar to the right side with the lock strap (Ref 9)
to the inside.
3. To carry the mat, roll it up and place it in the brackets of the carrier posts.
4. To use the mat, unroll it flat and hook it up to the trap rake hitch with the clevis pin and bridge pin.