Chapter 3: software installation & operation – Smart Avi AVRouter User Manual

Page 12

AVRouter Manual Version 1.0

Page 12

Chapter 3: Software Installation & Operation

The Main Routing Window enables you to control the router(s) connections by means of the
matrix panel, the button panel, or with pre-recorded routes called macros.

Matrix Panel:

This is probably the simplest way to route the connections. Simply click on the

cross point itself. The input on the left will then be routed to the output above.

Note: Inputs can be routed to several different outputs, but each output can only have a single
input at any one time. So you can have several connections horizontally but not vertically.

The Button Panel:

These are the numbered buttons across the top and left sides. Click an

output button on the top, and then click an input button on the left.

Options for using the Button Panel

Output Options:

Output Options:
To select multiple outputs next to each other, click on one output, then hold the shift key
down and click the last output. When the input is clicked, it is routed to all selected
outputs

To select multiple outputs individually, hold the control key down and click on any
number of outputs. When the input is clicked, it is routed to all selected outputs.

Input Options:

Input Options:
To route an input to all the outputs at once, hold the control key down and click on an
input.

To leave the outputs selected after the route is made, hold the shift key down and click
on an input.