Chapter 3: software installation & operation – Smart Avi AVRouter User Manual

Page 11

AVRouter Manual Version 1.0

Page 11

Chapter 3: Software Installation & Operation

Inputs/Outputs:

Enter the number of Inputs/Outputs your AVRouter has. For now we will

assume that there are 16 inputs and 16 outputs.

Com Port:

Select the appropriate com port that your computer is using to access the router.

Router Timeout:

By default this is 0 meaning the computer acknowledges commands almost

instantly. Sometimes a computer takes longer to respond. This setting should be left at 0. If you
need to change it, it should be no higher than 0.2.

After you have entered in the necessary information click OK.

This will now take you to the Main Routing Window where you can route the different video/
audio connections.

On this screen you will notice the input buttons running down the left side while the output
buttons run across the top. They are each labeled 1 through 16.

Note: The three small colored buttons at the lower right labeled ALL, VIDEO, and AUDIO are not
available if AV Split was not checked when you configured your router.